Download Flume User Manual
Transcript
Evaluation 6.11 Using the Saratoga Data Systems, Inc. public servers If you can get to and from the Internet with one or more of your test systems and have an appropriate set of ports (at least two) routed from the Internet to your test system, we have servers in Santa Clara, California (public.saratogadata.com) and in Shanghai, China (flume-sh.saratogadata.com). Each of these has a 100 TX full-duplex Ethernet connection to the Internet at 100 Mbps = 12,500 KB/s. The speedMaximum parameter on each is currently set to 5000 (KB/s) = 40 Mbps. If you want to try Flume using these systems we will supply you with a login. The Santa Clara system also has anonymous ftp (read-only) access to a set of test files that can be transferred for calibration and then for comparison. We currently (via scp) or have these files in /disk2/ftp/pub/test-data ftp://public.saratogadata.com/pub/test-data/ (via FTP) 2M.taz 15M.tar 250M.taz 500M.iso 2G.iso As of November, 2012 – the default configuration at public.saratogadata.com is Flume 2.3. You can confirm the version of Flume installed at public.saratogadata.com with the following command: $ ssh [email protected] flume --version Flume 2.3 User Manual Proprietary Page 40 of 54