Download Application Bucket Dredging PDS2000
Transcript
Integration Period The integration period is the period over which a mean value is computed. This mean value is then used as the value from the depth sensor. Apply VRU Data Enabled. The VRU data is used to calculate the actual depth of the vessel. (This is the default setting). Disabled. No VRU data is used. 4.2.2.6 Tide Gauge When the positioning system is not a RTK system one or more tide gauges are used to measure tide information to calculate the absolute depth. The properties window (‘ Figure 4-17 Tide gauge’): Properties window of the Tide gauge Tide Stations Select one or more tide stations that will be used to calculate the tide correction. The tide stations have to be created in the Advanced Computations (see below) before they can be selected here. 4.2.3 Computations Page When no RTK system is used for the positioning an extra computation is needed to compute the tidal correction. A ‘ Tide Computation’ has to be created in the Advanced Computations. to open the Advanced Computations. Click on PDS2000 - Application Bucket Dredging Vessel Configuration • 35