Download Application Bucket Dredging PDS2000

Transcript
from both sides plus the height to the deck as the height above the
waterline.
From the ladder length and the height of the bucket chain point above the
waterline an angle can be calculated.
When it is difficult to put the centre of the bottom bucket chain wheel on
the waterline, it is also possible to put an other point of the ladder on the
waterline. Then also the distance from that point to the bucket chain point
has to be measured.
The difference between the calculated angle and the inclinometer reading
can be entered as the ‘Sensor 1 Offset’ in the properties of the Dredge
Positioning System (Bucket) (see page 7). Check the sign convention
before entering the correction.
20 • Calibration
PDS2000 - Application Bucket Dredging