Download Application Bucket Dredging PDS2000

Transcript
Integration Period
The integration period is the period over which a mean value is
computed. This mean value is then used as the value from the depth
sensor.
Apply VRU Data
Enabled. The VRU data is used to calculate the actual depth of the
vessel. (This is the default setting).
Disabled. No VRU data is used.
4.2.2.6 Tide Gauge
When the positioning system is not a RTK system one or more tide
gauges are used to measure tide information to calculate the absolute
depth.
The properties window (‘
Figure 4-17
Tide gauge’):
Properties window of the Tide gauge
Tide Stations
Select one or more tide stations that will be used to calculate the tide
correction.
The tide stations have to be created in the Advanced Computations
(see below) before they can be selected here.
4.2.3 Computations Page
When no RTK system is used for the positioning an extra computation is
needed to compute the tidal correction.
A ‘ Tide Computation’ has to be created in the Advanced Computations.
to open the Advanced Computations.
Click on
PDS2000 - Application Bucket Dredging
Vessel Configuration • 35