1
Download UNICORN 5.0 User Reference Manual
Transcript
12 Evaluation 12.1 Peak integration 12.1.6 How to edit the peaks Step Action 2 Perform the operations below as desired: • Click to insert a new data point. • Double-click on a data point or right-click the point and select Delete Point from the short-cut menu to delete the point. • Click a data point and drag the point to a new position to move the baseline. Note: Accept negative peaks must be selected before the peak integration if you want to be able to drag a data point to move the baseline above the curve. How to calculate a new baseline The baseline can be recalculated in the Edit Peak Table dialog box. The table below describes how to do this: Step Action 1 • Select Baseline:New:Calculate. or • Right-click and select New Calculate from the shortcut menu. Result: The Settings dialog box opens. 2 • Select an algorithm (Morphological is default). 3 • Adjust the Baseline parameters as desired. or • Click the Default Values button for the default values. 4 • Click OK. Result: The baseline is recalculated. Note: Select Baseline:New:Zero Baseline to replace the calculated baseline with a zero baseline. 03-0014-90 • p 352
