Download - Paul Scherrer Institut

T H E
1 5
T
V E R T I C A L
M A G N E T
M A 1 5
7.2 Installing MA15
The 15 T magnet requires a completely non magnetic environment. The goniometer motors
thus have to be removed and replaced by a rigid support, which does not allow for any tilt.
The magnet also does not allow for any rotation. The sample table motor OM (A3) can thus
be not used and is replaced by a rotating sample stick .
Remove goniometer from the sample table. Only unscrew the 4 screws connecting the
goniometer with the sample table. Do not take the goniometer apart. Unplug the cables for
the goniometer and translation motors (see picture below).
Unscrew here (4 screws)
Unplug cables here
Screws holding omega motor
(6 screws)
38