Download C SERIES

1. Overview
1.1 Overview of C series
The Multi-point Temperature Control System C series consists of the Power source host link unit
(hereafter CPT-20A) and 2-channel temperature control unit (hereafter CCT-235).
There are two types of Base unit, each with their own way of mounting.
CBT-205: A single CPT-20A and up to five CCT-235 units can be mounted.
CBT-210: A single CPT-20A and up to ten CCT-235 units can be mounted.
The Base unit can be mounted on the DIN rail.
1.2 Units and structure of C series
(1) Power source host link unit: CPT-20A
Link unit to supply the power to the CCT-235 and to communicate with the host unit.
(2) Temperature control unit: CCT-235
2-channel specification: CCT-235-2 /
Independent temperature control unit with 2 channels
The input or output for 2 channels are of the same specification.
Heating/Cooling specification: CCT-235- / , D
Heating/Cooling temperature control unit with 1 channel
Heating/cooling control can be carried out with 1 channel input.
(3) Base unit
CBT-205: Base unit for mounting the CPT-20A and CCT-235.
One CPT-20A is required to 1 base unit.
A maximum of five CCT-235 units can be mounted.
CBT-210: Base unit for mounting the CPT-20A and CCT-235.
One CPT-20A is required to 1 base unit.
A maximum of ten CCT-235 units can be mounted.
(4) Communication cable
CPM: Communication cable (3m) to connect between the CPT-20A and CMT-200 (Touch panel unit),
between the CPT-20A and COT-200 (Console unit)
Modular jack is attached to one side of the cable and Y terminal is attached to the other side of
the cable.
CPP: Communication cable (50cm) to connect between the CPT-20A units (for increasing the blocks)
Modular jack is attached to both end of the cable.
5