Download CEMPlanner Version 6.6 User Manual
Transcript
Adding a New Facility 24. To add a new facility, click Add New Facility to open the Facility Details window. The only required fields are Facility Name, Facility Type, and Location Information. However, it is a good idea to capture as much information as possible prior to an emergency or disaster. a. Facility Name (required) – User defined. Users are encourage to use common to identify the name. b. Facility Type (required) – Click Select Facility Type for a list of facility types. If the desired facility type is not listed, click Add Facility Type to add a new type. c. Location Information (required) – Click Select Location to search for the location in the system. If the location has not been defined, simply click Add New Location to create it. Remember to include the street address, city and ZIP to ensure that the facility will geo-code properly in the GIS module. d. Attachments – Chemical data, floor plans or other required information can be associated with the facility. e. Contact Information – Click Select Point of Contact to open the Global Contacts List you created earilier. Search for the desired contact and click the appropriate radio buttton to select. Remember you can add a contact if they do not exist in the system already. f. Possible Incident Facilities – Select Click here to Add/Remove Possible Incident Facility Types to associate possible types such as shelter, base, camp, EOC, etc wit the facility. 25. When all facilities information is completed, click Save. Once the facility is saved, it will be displayed in the Facilities grid. From this grid you can open the Facility Details screen by clicking on the facility name, view facility contact information by clicking on the contact, view agency contact information by clicking on the agency, or view the floor plans by clicking on the floor plan file name.