Download USB Protocol Suite User Manual

Transcript
Teledyne LeCroy Corporation
Voyager M3/M3i Analyzer
The features of the Analyzer are listed in the following table.
Features
Power Switch
Status LED Function
(0/1) Off/On
Blue if system successfully initializes
Analyzer Ports
Red if hardware failure
Green while initializing
A (downstream) and B (upstream)
Analyzer LEDs
Rec
3.0
Off
Solid Yellow
Slow Flashing Yellow
Fast Flashing Yellow
Solid Green
Blinking Green
2.0
Solid Yellow
Slow Flashing Yellow
Fast Flashing Yellow
Solid Green
Flashing Green
Recording
Red if 2.0 recording enabled or 3.0 recording enabled in Analyzer mode
USB 3.0
No traffic or LFPS
Only Polling LFPS
Low Power States
Symbol Traffic, Training (TS1/TS2/TSEQ)
Link Traffic (U0) LUP, LDN
TP's and DP's (actual traffic)
USB 2.0
FS SOF's, LS EOP's, or control endpoint traffic
LS Traffic on endpoints other than 0
(resets activity timer as in 3.0)
FS Traffic on endpoints other than 0
(resets activity timer as in 3.0)
HS SOF's or control endpoint traffic
HS traffic on endpoints other than 0
(resets activity timer as in 3.0)
Exerciser Ports
A (downstream) and B (upstream)
Exerciser LEDs
Gen
Rec
3.0
Off
Solid Yellow
40 Generating
Green if generating enabled
Recording
Red if 3.0 recording enabled when in Exerciser mode
USB 3.0
No traffic or LFPS
Only Polling LFPS
USB Protocol Suite User Manual