Download USB Protocol Suite User Manual
Transcript
Teledyne LeCroy Corporation Voyager M3/M3i Analyzer The features of the Analyzer are listed in the following table. Features Power Switch Status LED Function (0/1) Off/On Blue if system successfully initializes Analyzer Ports Red if hardware failure Green while initializing A (downstream) and B (upstream) Analyzer LEDs Rec 3.0 Off Solid Yellow Slow Flashing Yellow Fast Flashing Yellow Solid Green Blinking Green 2.0 Solid Yellow Slow Flashing Yellow Fast Flashing Yellow Solid Green Flashing Green Recording Red if 2.0 recording enabled or 3.0 recording enabled in Analyzer mode USB 3.0 No traffic or LFPS Only Polling LFPS Low Power States Symbol Traffic, Training (TS1/TS2/TSEQ) Link Traffic (U0) LUP, LDN TP's and DP's (actual traffic) USB 2.0 FS SOF's, LS EOP's, or control endpoint traffic LS Traffic on endpoints other than 0 (resets activity timer as in 3.0) FS Traffic on endpoints other than 0 (resets activity timer as in 3.0) HS SOF's or control endpoint traffic HS traffic on endpoints other than 0 (resets activity timer as in 3.0) Exerciser Ports A (downstream) and B (upstream) Exerciser LEDs Gen Rec 3.0 Off Solid Yellow 40 Generating Green if generating enabled Recording Red if 3.0 recording enabled when in Exerciser mode USB 3.0 No traffic or LFPS Only Polling LFPS USB Protocol Suite User Manual
Related documents
Manual - Teledyne LeCroy
USB Protocol Suite User Manual
USB Protocol Suite User Manual
Johnson Controls 4000 User's Manual
USB Protocol Suite User Manual
USB Protocol Suite™ 4.75 Build 1561 Release
USB Mercury T2C Quick Start
USB Protocol Suite™ 3.80 Build 800
- Teledyne LeCroy
AMD LE-363 User's User`s manual
USB Protocol Suite ™ Release Notes
SierraNet M408 User Manual