Download Operator`s Manual

D Unpacking & Set Up
D Unpacking & Set Up
D.1
Unpacking
Read the DocUReader 2 Operator’s Manual carefully before
installation, so as to ensure proper operation of the analyzer from the
outset.
Follow the specified installation instructions carefully. Otherwise,
inaccurate results or damage to the analyzer may occur.
Check the carton and instrument for visible signs of damage; if seen, contact
the carrier immediately.
Carefully remove the contents of the shipping carton, remove each of the
wrappings and check for the following items:
List of delivered parts:
• DocUReader 2 analyzer
• Power supply
(AC Adapter 100V–240V, 50/60 Hz)
• Power supply cord
If the power cord is not the style
you need, Contact your service
representative
• Operator's Manual CD
• Quick Reference Guide
• Test strip tray
Picture 3: Contents
Do not touch the reference pad
• Roll of printer paper
• Check strip
Do not touch the check area, hold it by the handle
D.2
Setting up
Place the instrument on a solid, level surface where the temperature and
humidity are fairly constant.
Make sure the instrument is allowed to acclimatize to room temperature prior
to use.
Make sure that you
•
•
•
14 / 85
Do not place the instrument in close proximity to sources of strong
electromagnetic radiation or vibration sources
Do not place the instrument near heater devices, ovens or air
conditioners
Do not expose the instrument to strong light sources (e.g. direct
sunlight)