Download 308 VCA Volume Control/ Loudness EQ

Transcript
Symetrix 308 VCA Volume Control/Loudness EQ User’s Guide
Hardware Specifications
Input/Output
Maximum Input Level
Maximum Output Level
Input Impedance
Output Impedance
Input Common Mode Rejection
Performance Data
Frequency Response
THD+N
Residual Output Noise
Gain Control
Equalization
Analog Control
Control inputs accept any of
Gain
Ramp Out
Auxiliary Power Out
+20 dBu balanced, +20 dBu
+22 dBu balanced, +18 dBu
>20k ohms balanced, >10k ohms
200 ohms balanced, 100 ohms
20 Hz to 20 kHz +0, – 0.5 dB
(with no equalization applied)
20 Hz to 20 kHz +0, –1.5 dB (at unity gain with max EQ depth)
<0.025% at unity gain, 0 dBu in/out
– 95 dBu typical at unity gain
0 dB (unity) to – 65 dB
–15 dB max @ 1 kHz
(a) 10k linear rheostat to ground
(b) 10k linear potentiometer from +10 reference output to ground
(c) 0 to 10 VDC control voltage
(d) Symetrix RC-3 Remote Control
Unity at +10 VDC and max attenuation at 0 VDC
Buffered duplicate of the Control In voltage
+24 VDC ± 10%, 100 milliamps max continuous load
Connections
Inputs, Outputs, Control Ports
AC Power In
Physical
Size (H x W x D)
Shipping Weight
Electrical
Power Requirements
PS-3
PS-3E
unbalanced
unbalanced
unbalanced
unbalanced
>40 dB
Euroblock
7-pin DIN
1/2 rack unit
1.75 in. x 8.5 in. x 6.5 in. / 4.445 cm x 21.59 cm x 15.875 cm
4.5 lbs.
12W maximum, Symetrix PS-3 or PS-3E only
115V, 60 Hz AC nominal
230V, 50 to 60 Hz AC nominal
In the interest of continuous product
improvement, Symetrix, Inc. reserves
the right to alter, change, or modify
these specifications without prior
notice.
14