Download CinePlex v2 Manual

1
When embarking on this process, you must establish if CinePlex Markup is
already installed on the target computer. If CinePlex Markup has already been
installed, then go to step 3. If not, then go to step 2).
2
To install CinePlex Markup from the CD, then follow the procedures in
Appendix A: Installing CinePlex System from the CD . If not, go to step 3.
3
If you wish to install CinePlex Markup automatically from the web, follow the
procedure in Appendix A: Installing CinePlex System by Web Update . If you
wish to install CinePlex Markup manually from the Plexon website, follow the
procedure in Appendix A: Installing CinePlex System Manually from the
Plexon Website .
A.6.1 Installing CinePlex System from the CD
If you are installing the CinePlex System on a different PC, continue with the
installation procedure that follows. The software consists of a CD and software
license keys.
There are three steps to installing CinePlex Markup:
1
Install the CinePlex System files from the CD and run the setup program.
2
Install and configure the Rainbow Sentinel system drivers.
3
Install the Sentinel hardware key.
To install CinePlex files
Version 2.0
1
Close all applications before you begin installing CinePlex.
2
Place the CinePlex System setup CD in your computer's CD-ROM drive.
3
Find the CPXv2Setup.exe file on the CD.
4
Double-click CPXv2Setup.exe.
5
When the Welcome screen appears, follow the on-screen instructions. Click
Next to acknowledge your acceptance of the copyright warning and to
proceed with installation.
6
Review the information in the Read Me File window. If you choose to cancel
the installation and you click Cancel, the following Install dialog box opens.
A-21