Download QS6 Series User Manual

Single-channel all-digital AC servo drives QS6 Series
3) When the servo enable can be connected together with the power supply, electric incentive
circuit will be connected after approx. 1.5 seconds.
4) Frequent power –on and power –off may damage soft-start circuit and dynamic braking circuit.
Therefore, it is better that power-on and power-off frequency should be limited to be 5 times
per hour, and less than 30 times every day. If the drive or motor is overheating, please wait
for 30 minutes for cooling after troubleshooting, and then re-connection of power.
Power Supply Wiring Diagram 7-1
7.1.2 Power Timing:
- 37 -