1
Download Field Manager DisplayUser Guide
Transcript
14 The Multi-Application Control Plugin Turning individual channels on or off On the detailed channel tab, tap On. The channel is turned off when the On button is raised . When you return to the channel status tab, the channel’s current application rate will appear as Off. To return to the overview, press . Adjusting the target rate (manually) The target rate is the rate that you want the air seeder to plant at. To manually increase the target rate, press +. To manually decrease the target rate, press –. The target rate adjusts by the Increment/Decrement value. See page 361. Adjusting the target rate (with a preset rate) If you have created more than one preset rate for a material, the Preset Rate Selection button will be available . Tap the button to select between the preset target rates. The new preset rate will appear between the + and – buttons. Precharging the air seeder before driving When the vehicle is moving, the air seeder is continually distributing seed. However, when you begin driving, the seed can take time to reach the tubes. To avoid this, before you begin moving, press the Precharge button . It begins moving seed to ensure that seed distribution can begin when you begin planting. 4 30 AgGPS FieldManager Display User Guide
