1
Download Field Manager DisplayUser Guide
Transcript
9 The Autopilot Plugin Trimble strongly recommends that you perform this calibration only if the default sensitivity is unacceptable under all conditions. Be very careful not to choose a sensitivity setting that is either too sensitive or not sensitive enough. In either case, the manual override function may cease to function properly. On some platforms, it may be possible to set the sensitivity so low that the manual override function will not detect any steering wheel motion. It is vital that you avoid this. To configure and check the manual override: 1. Select the Manual Override option from the procedure list. (See page 179). The Autopilot Manual Override Calibration screen appears: 1 84 AgGPS FieldManager Display User Guide
