Download Field Manager DisplayUser Guide

The Multi-Application Control Plugin
14
12. Enter the alarm trigger rates:
Item
Description
High Population Alarm
When a sensor detects that the seed rate has risen to this
percentage above the preset rate, a warning appears. For
example, if the setting is 20%, the warning appears when the
sensor detects that the seed rate has risen to 120% of the preset
rate.
Low Population Alarm
When a sensor detects that the seed rate has fallen to this
percentage below the preset rate, a warning appears. For
example, if the setting is 20%, the warning appears when the
sensor detects that the seed rate has fallen to 80% of the preset
rate.
High Alarm Delay
This setting is in seconds. The alarm must be triggered
constantly for this many seconds before it activates to alert you
of a high population.
Low Alarm Delay
This setting is in seconds. The alarm must be triggered
constantly for this many seconds before it activates to alert you
of a low population.
Min Row Fail Rate
The rate of failure that is acceptable before the Row Fail alarm is
triggered. Increase the number in the Seeds field to reduce the
reporting of errors.
Product Level Alarm
When the product gets down to this level, a warning is
triggered.
13. Tap OK and then tap OK again.
The material is now configured. Repeat this process to add an
additional material.
140.1
Configuring the channels
When you have configured a material, you can configure the channels.
The FieldManager display can control up to 4 channels of different
materials at once.
AgGPS FieldManager Display User Guide
3 63