Download Manual R/S+ CPS

 II. System Configuration
The R/S-CPS+ is available in four versions, the difference being temperature range and temperature control ooptions:
The R/S-CPS+ Rheometer system uses a bath/circulator for temperature range of -20°C to
250°C and consists of:
- The head which contains the drive system, display and electronics
- Instrument base which houses the measurement plate (which is jacketed)
- Constant temperature bath circulator
- AC adapter
The R/S-CPS+ P1 Rheometer system has peltier plate temperature control for temperature
range of 0°C to 135°C and consists of:
- The head which contains the drive system, display and electronics
- Instrument base which houses the measurement plate (which is jacketed)
- Peltier controller
- AC adapter
The R/S-CPS+ P2 Rheometer system has peltier plate temperature control for temperature
range of 20°C to 180°C and consists of:
- The head which contains the drive system, display and electronics
- Instrument base which houses the measurement plate (which is jacketed)
- Peltier controller
- AC adapter
The R/S-CPS+ E1 Rheometer system is electrically heated for temperature range of 60°C to
250°C and consists of:
- The head which contains the drive system, display and electronics
- Instrument base which houses the measurement plate (which is jacketed)
- Peltier controller
- AC adapter
Available accessories for any of the four systems include:
• Printer
• Measuring cones and plates (see Appendix A)
• Computer system
• RHEO 2000 Software
The accessories in bold print are necessary for a minimal configuration.
Brookfield Engineering Labs., Inc.
Page M01-213-A0706