Download Starting UNI VISION

Chapter 1 : UNI VISION Overview
Functions
UNI VISION is a Java based software that can communicate, get the status, send
commands and monitor the UPS connected to the computer where it is running.
UNI VISION also provides the local computer shutdown in case of a Mains Failure
condition, Low Battery condition, UPS Overload condition, UPS Over-Temperature
condition, and Imminent Stop condition. All shutdown events can be set by the User.
The shutdown software will proceed to perform the automatic shutdown to prevent an
abnormal Server shut-off.
Features
Server connection through RS 232C connector, TCP/IP tunnelling, or USB
The server is connected to the UPS via serial cable, TCP/IP (*) or USB (**).
(*) (**) – Only for enabled UPSs (refer to the UPS user manual for further details)
(**) – Only for Microsoft Windows™ platform.
UPS management
It is possible to monitor and manage the UPS.
Local and Remote UPS monitoring via HTTP and JAVA applets
It is possible to monitor the UPS status using HTTP internet Browser and Java
applets.
Local automatic shutdown
UNI VISION provides automatic shutdown in case of alarm condition when preprogrammed(*).
(*) – Not all conditions are available for all UPSs (refer to the UPS user manual for
further details)
Shutdown scheduling
UNI VISION provides the possibility to perform a scheduled shutdown to permit the
shutdown and restart of the load at pre-set times.
3