Download Starting UNI VISION

Transcript
Appendix C : UNI VISION Special Configurations and
Commands
This software can work with almost all Operating Systems, however it may be
necessary to give different commands to send warning messages and to execute the
shutdown procedure, depending on which Operating System you are using.
Procedures ( for Windows™ Operating Systems )
Warning Messages
By default UNI VISION is already configured to be able to send warning messages on
Windows™ NT4.0, Windows™ 2000 and Windows™ Xp using the “NET SEND”
command to the local computer; if you need more information about this command,
please see the related part in your Operating System manual.
Note : In order to display the warning messages only in the command shell you have
to clear the field “Warning Command” in the Admin HTML Interface menu
Prg ParametersParameters (see the result in Figure C.1).
Figure C.1 Command Shell Warning Message
64