Download ED9732NV User Manual

NVR User Manual
Fig 5-19 Alarm Configuration-Motion
④
After clicking Area button, a dialog box will pop up as Fig 5-20.
Fig 5-20 Motion-Area
⑤
⑥
⑦
⑧
In the Area interface, you can drag slide bar to set the sensitivity value (1-8). The higher
the value is the more sensitive it is to motion. Since the sensitivity is influenced by color
and time (day or night), you can adjust its value according to the practical conditions.
Left click the grid and drag to delete area. Click
icon to set the whole area as
detection area. Click
icon to clear the set detection area. Click
icon to test
the sensitivity as per the local conditions. Once motion is sensed, it displays a figure
icon. Click
icon to save the setting. Click
icon to exit the current interface.
Select “All” to set the same settings for all channels.
Click “Apply” button to save the setting.
Go to Schedule tab. The setting steps for schedule for motion based alarm are similar to
normal schedule setup (see Chapter 5.4.1 for more details).
Note: Prior to setting motion detection field it is recommended that you click
icon to clear the existing field and set afresh.
27