Download Connection - Freescale Semiconductor

Transcript
FSICEBASE Emulator
Setting Up The System
1. Use a USB cable to connect the host computer to the FSICEBASE
2. Start the FSICEBASE Configuration Utility
a. From Windows desktop, click Start menu
b. Select Run
c. Browse to the following executable file:
installation_directory\prog\GDI\FSICEBASE\setup.exe
The installation_directory is the directory where you installed the
CodeWarrior software. The default installation directory is
C:\Program Files\Freescale\CW08 v5.x
d. Click OK — The FSICEBASE Configuration Utility starts (Figure 17.4 on
page 414)
Figure 17.4 FSICEBASE Configuration Utility Window
3. Click Connect to FSICEBASE button — FSICEBASE Communication dialog box
appears, as shown in Figure 17.1 on page 409.
4. Select USB
NOTE
You can also use the default IP address to connect through TCP/IP.
5. Click OK — the FSICEBASE Configuration Utility connects to the FSICEBASE
414
HC(S)08/RS08 Debugger Manual