Download iPLEX Software Guide.book

Transcript
Defining Plates
Applying Sample Groups Using 4(96) to 1(384) Mapping
(Continued)
Starting from well A2, samples would be applied
as shown here (the numbers are sample names)
Starting from well B1, samples would be applied
as shown here (the numbers are sample names)
Starting from well B2, samples would be applied
as shown here (the numbers are sample names)
7.
MassARRAY® Typer 3.4 Software
User’s Guide for iPLEX™ and hME
In the plate diagram, right-click the well from which you want to start applying
the samples and choose Apply.
52
Doc 11546, R03 CO 060094
June 30, 2006