Download 2MPRO User Manual

Transcript
2MPro Sign Software© Version 2.13
3/18/2004
Page 5
Setting the New Animation Options
The first time you launch the program you
will get a setup screen like the one shown.
This screen allows you to set the matrix and
available colors of the sign being
programmed. In order to set these fields
you must know the specifics of your signs.
Note: Ensure this is set correctly for your
sign. Animations created with the wrong
settings will not work with your sign.
Consult the documentation that came with
your sign or call Multimedia if you are
uncertain how to set these.
Number of Colors: Set the number
of colors that your sign is capable
of displaying.
Note1 – Colors available are subject to the type of sign you are
programming. You cannot display more colors than you sign can
produce.
Once you have selected all of the settings, click on the
Ok button to apply the settings. If this is the only sign
you are programming with this software, the new setting
will become the default and you will not have to set this
again. If you are programming more than one sign that
have different settings, these can be changed at any time
by selecting, “New Animation Options” from the File
Menu. Once you have changed the settings, all new
animations will be created with the new settings.
Width: Set the number of Pixels
that are across the width of the sign.
Height: Set the number of
Pixels that make up the height
of the sign.