Download Banana Pro&Pi User Manual

Transcript
(2)Setting up the B-Pro/B-Pi and running the camera
In the graphical interface, open the command line terminal LXterminal.
First you have to load the necessary drivers needed by the camera module:
sudo modprobe ov5640
sudo modprobe sun4i_csi
If modprobe sun4i_csi does not work try:
sudo modprobe sun4i_csi0
Then you can use MPlayer to test the camera:
mplayer tv://
Banana Pro&Pi User Manual
- 46 Copyright © 2015 LeMaker. All Rights Reserved.