Download Banana Pro&Pi User Manual
Transcript
Run evtest and press button on your remote facing the IR receiver and if you see some output ... bingo! You have found a working remote! Remember: only few remotes work. evtest /dev/input/event0 (3) Now install and configure LIRC apt-get install lirc edit /etc/lirc/hardware.conf as below: # /etc/lirc/hardware.conf # # Arguments which will be used when launching lircd LIRCD_ARGS="" #Don't start lircmd even if there seems to be a good config file Banana Pro&Pi User Manual - 49 Copyright © 2015 LeMaker. All Rights Reserved.