Download 527E Manual - Full Compass

Transcript
Filters
LOW CUT
Selects the cutoff frequency of the LOW CUT FILTER (variable from 6 Hz to 260 Hz).
This filter will uniformly pass frequencies above the cutoff frequency.
HIGH CUT
Selects the cutoff frequency of the HIGH CUT FILTER (variable from 3kHz to 65 kHz).
This filter will uniformly pass frequencies below the cutoff frequency.
Parametric EQ Low
FREQUENCY
Varies the center frequency of the low-frequency equalizer from 16Hz to 500 Hz.
BANDWIDTH
Varies the bandwidth of the low-frequency equalizer from 0.3 to 4 octaves.
(Q=4.8 to 0.27).
CUT/BOOST
Sets the degree of boost or cut; ±15 dB.
Parametric EQ Mid
FREQUENCY
Varies the center frequency of the mid-frequency eq from 160 Hz to 6300 Hz.
BANDWIDTH
Varies the bandwidth of the mid-frequency eq from 0.3 to 4 octaves.
(Q=4.8 to 0.27).
CUT/BOOST
Sets the degree of boost or cut; ±15 dB.
Parametric EQ High
Varies the center frequency of the equalizer from 680 Hz to 22 kHz.
BANDWIDTH
Varies the bandwidth of the high-frequency equalizer from 0.3 to 4 octaves.
(Q=4.8 to 0.27).
CUT/BOOST
Sets the degree of boost or cut; ±15 dB.
527E
FREQUENCY
POWER LED
6
Indicates the presence of AC power.