Download SCOS-2000 Database Import ICD

Ref.:
SCOS-2000 Database Import ICD
EGOS-MCS-S2K-ICD-0001
Issue:
6. 9
Date:
2010-07-06
Page:
178
2000 only support verification for commands. Several verification stages can be associated to each command.
However, only one verification stage for each CVS_TYPE (e.g. only one acceptance verification stage can be
associated to a command).
As from R4.0, it is possible to dynamically disable the report based verification stages associated to a command (this
is achieved by unsetting the corresponding acknowledgment flag when loading a command). However, it should be
noted that this mechanism can only be used to disable the execution of a verification stage specified in the CVS table
and associated to a command via the CVP table. It is not possible to use this mechanism to dynamically associate a
new report based verification stage to a command. This implies that all commands for which a PUS Service 1 report
is generated by the receiving on-board application must be associated to the corresponding verification stage in this
table.
Fi. Nr
Field name
Field Type
Description
Ma/
Def
1*
CVP_TASK
Char(8)
This field contains the name of the command or of the sequence M
(CCF_CNAME or CSF_NAME) using the verification stage
specified in CVP_CVSID.
2*
CVP_TYPE
Char(1)
Flag identifying the type of the task associated to the verification ‘C’
stage.
‘C’- if the task is a command,
‘S’ - if the task is a sequence (not supported by SCOS-2000).
3*
CVP_CVSID
Number(105This field contains the ID (CVS_ID) of the stage associated to the M
task. Note that there must be at most one verification stage of a
specified type (e.g. CVS_TYPE = ‘A’ or ‘C’) associated to each
command.
3.3.3.5 Command/Sequence Parameter Sets
ESA/OPS-GIC