Download File - Toronto Tool

User Guide
SRG-50 (Portable Saw and Router Guide System)
USER GUIDE:
Thank you for purchasing the SRG-50 (Portable Saw and Router Guide System). Below you will find safety
procedures, SRG-50 set-up procedures and operating instructions. There is also a section dedicated to
available accessories for the SRG-50. For video demonstrations, be sure to visit the “How To” section of our
web site www.torontotool.com for the SRG-50 Seminar “how to” video.
The patent pending design of the SRG-50 is designed for the "woodworker on the go”. The SRG-50 is
professionally designed for accurate cross cutting, rip cutting, miter cuts and routing all lumber up to full
4’ x 8’ sheets.
The SRG-50 has the full functionality of a table saw, miter saw, crosscut saw, panel saw and “X”, “Y” router
table all in one compact portable tool. You supply the quality circular saw or router and the SRG-50 system
supplies the rest. The best part, the SRG-50 is completely portable with a fold up legs and wheels. Never
before has there been such a practical woodworking tool that provides ease of use, accuracy, and multiple
capabilities in one portable tool with the quality and rugged construction of the SRG-50.
The SRG-50 will easily fit in a small mini-van or SUV. Not only is the SRG-50 easy to store and quick to set up,
you can take it to the job site or cottage to complete all those jobs you have wanted to do.
The SRG Sled, included with the SRG-50, slides effortlessly along the top clamp channel to any position and
locks in place for rip cutting or routing any size panel or board up to a full 4’ x 8’ sheet. The accuracy of cut
provided by the SRG-50 is equal to any high quality large table saw or CNC Router available in the market.
Cross cutting panels provides greater accuracy on the SRG-50 than a standard table saw. The SRG-50 allows
you to move the saw against a cut fence for cross cutting rather than struggling to move a panel into a blade
as on a table saw.
In addition, the SRG-50 comes with a remote power switch, SRG Sled, trigger lock, router insert, 2 router guide
stops and 2 panel lock stops that are also used as an angle lock.
The contents of this manual are subject to change without notice. For any updates or improvements please visit our web
site at:
www.torontotool.com
1|Page