Download B - Schneider Electric

3
Selecting the Operating Mode
3
Automatic Mode
Automatic step-by-step sub-mode
(not relevant to TSX AXM 162 module)
Commands
XBT Display
Comments
STEP
AX 0
RUN
AUTO S/S
PR
Temporary display that appears
during mode selection.
RF
Dedicated mode display.
AX 0
AUTO
N START
S/S
= 5
START
Displays the start step for the
AXM program. (modification of the
start step follows the same procedure as the Automatic cycle mode).
Resume order from the next step.
AX 0
AUTO
N ACTUAL
S/S
= 5
Executed
instruction
Displays the step number being
executed.
D
Go to the next display as soon as the
instruction is executed.
AX 0
AUTO S/S
N RESUME
STOP
= 6
Displays the number of the next step
to be executed.
instruction
END
Automatic block-by-block sub-mode
(not relevant to TSX AXM 162 module)
The screens follow in the same sequence as the step-by-step mode, with the
following differences:
● Mode name: AUTO B/B
● Restart after each move instruction with stop a command.
Special cases
●
●
If the AXM program is already being executed when one of the automatic
sub-modes is selected, the screen that shows the current step is displayed
immediately,
If the AXM program is waiting to resume, the user can continue the program
by pressing <START>.
3/3