Download X-Control

General Xeva camera specifications
The XenICs Xeva USB camera combines a thermo-electrically cooled detector head
and the control and communication electronics. The exceptional efficiency of the
installed detector in the infrared makes it possible to perform analysis on light emitted
in wavelengths not visible to the naked eye.
The camera head is designed within aluminum anodized housing. In front you will
find a lens fitting. Any standard C-mount lens, which is able to process the infrared
light, can be mounted on the housing. Your camera is supplied with a standard Cmount lens. Also compatible are CS-mount lenses if an additional adapter is used.
At the rear end, one can find the fan inlet.
The fan is used to cool the thermo-electric cooler. All the electrical connectors are to
be found at the rear end.
The XEVA-USB FPA digital camera is operated from one single 12 V – 5 A power
supply (included in the configuration) and includes all voltage regulating circuits, a
temperature stabilization circuit for the cooling of the detector and the signal output
analog to digital conversion. The camera head interfaces to a PC via a standard USB
1.1 or 2.0 bus; there is no need for additional frame grabber cards. Frame grabbing via
LVDS or Camera Link is available for the XEVA-LVDS-FPA and the XEVA-CLFPA. An additional PCI frame-grabber card is needed for those cameras.
Interfaces
Power
User’s PC
PCI Card
“Frame grabber”
Camera Link, LVDS
Control Channel (serial)
Camera
NTSC
PAL
Acquire
USB Cable
USB Port
Image
Memory
Trigger
XControl
TV
Image Display
CLIP
Save / Restore
Mass
Storage
Device
X-Control User Manual
12
June 22, 2006