Download User Manual - Excalibur Engineering

Transcript
Setting Up a PCI Analyzer Test
Concealing the Card from the System
Concealing the Card from the
System
Concealing the card is useful, for example, for debugging a system that
does not boot properly. You can run the PCI Analyzer to see what is
happening on the PCI bus.
A jumper allows you to conceal the Agilent E2928A testcard from the
system under test before you run your test. The card will not reply to any
configuration access from BIOS and will, therefore, be completely
invisible for the system.
External
Power
Socket
Card is
visible
invisible
NOTE
42
If the card is invisible for the PCI system, you cannot control the card via
the PCI port.
Agilent E2928A PCI Analyzer User’s Guide, August 2002