Download User Manual

RIGOL
1.
To set the LAN
Offer the Storage and Load Operation of the Network Configuration needed for
Remote Control of LAN Interface. You can configure IP Address, DNS setting or
check the current network configuration.
Press Utility Æ I/O Setup Æ LAN, to enter the following interface.
Figure 2-70
Table 2-30
LAN Setup Menu
Function
Menu
2-74
Settings
Explanation
IP
Setup
Set the corresponding parameter for IP
DNS
Setup
Set the corresponding parameter for
NDS
Current
Config
The current setting information about
the host
© Copyright RIGOL Technologies, Inc. 2007.
User Guide for DG3000 Series