Download User Manual

RIGOL
inform the user that if a technical problem occurs after the updating, contact the
RIGOL technician for support.
Invalid code.
When the user is updating the system, if the password is wrong, this message will
appear.
Valid code. System update is permitted
When the user is updating the system, if the password is correct this message will
appear.
Wave file will cover.
If the arbitrary waveform to be stored is larger than 128K, the other places will be
used to store the waveform.
Mobile disk installation is error!
U disk installation failed, and the system could not identify it.
Error Message
Incorrect secure code, please try again.
User has to enter the correct password before they can calibrate the instrument. If
the password entered is incorrect, this message will appear to inform the user to
reenter the password.
Please first complete step**：
Before the instrument is calibrated, if the user wants to perform the selected
calibration procedure, this is to inform the user to start from step**.
Select units to enter value or press CANCEL.
When a parameter is input, inform the user” Choose the parameter unit” to finish the
change to the parameter; or the user can press Cancel button to cancel the current
operation.
Trigger ignored.
If groups of GET commands or * Trigger is received, the system will ignore the
grouped GET commands to secure the right source.
Instrument is in remote mode. Press Local.
If the instrument is in the Remote Mode, the front panel will be nullified. Press Local
（also Burst），to shift the instrument mode into local, so that the front panel can
work.
Initial # of points upper limit=524,288.
The upper limit of the initial points is 524,288. If the specified waveform has more
than 524,288points, the system will adjust the number to 524,288 automatically.
4-4
© Copyright RIGOL Technologies, Inc. 2007.
User Guide for DG3000 Series