Download NO.1.1 CONTROL SYSTEM

3)
Press the “Menu” key to enter the interface for copying a file.
4)
Press the “Pulse” key to enter the interface for deleting a file.
5)
Press the “Enter” key to for file processing. (For operation details, refer to the
engraving & cutting processing in 3.2.4)
6)
Press the “ESC” key to return to the file management interface.
2.
Copying a file
You can copy the file from the internal flash memory to a USB disk, or vice versa. Before the
operation, be sure to:

Forbidden carving out file or downloading file by SmartCarve4.2.

Insert the USB disk.
To copy a file:
1)
Select the file you want to copy.
2)
Press the “Menu” key to enter the interface for copying a file (F3-75).
3)
Press the “Enter” key to copy the file.
4)
Press the “ESC” key to return to the file list interface.
During the operation, the LCD screen shows the corresponding progress (F3-76). Upon
completion, the system prompts success (F3-77) on the screen and returns to the file list
interface.
File Copy
Esc
Ok
Fig.3-75 File copy interface
Processing...
Progress:100%
Fig.3-76 Copying interface
Copy Success!
Fig.3-77 Success interface
79