Download GEA-8130A Network Analyzer

The User’S Manual for GEA-8130A Network Analyzer
Figure 7.3.6 IP layer Parameter of Tx Set
1.
【Src. IP】:set IP address producing traffic, set host’s port address or specified IP address；
2.
【Des. IP】:set destination IP producing traffic；
3.
【TTL】:define TTL value of IP protocol layer, the range is 1~255；
4.
【DS Field】:define DS Field value of IP protocol layer, the range is 1~255；
7.4
Receiving Setting
Receiving setting is used for setting receiving filter parameters of port1, port 2. Select respectively
ports and parameter setting in two-layer tab pages, ports include port1, port 2, selected ports’ parameters
include 6 setting items: parameter summary, MAC layer, IP layer, Transport layer, Stream Filter, BERT Set.
Filter function makes filtering statistics only for cared message.
7.4.1
Parameter Summary
There are four configuration items, the present selected configuration item can be used as the present
using configuration, as is shown in figure 7.4.1.
http://www.lzdd.com
Page 21