Download Installation and Reference Manual

PM32 Detector Specific VIs
If PushSupport is true the PM32 detector will continuously transfer sequences of acquired data
of Shots shots via the TCP/IP data socket (push socket).
PMT32Channel Get Data.vi
Request data (if QueryBefore = TRUE).
Read data from the multispectral detector.
If QueryBefore = FALSE a subsequent acquisition must have been started with the TRANSMIT
option.
PMT32Channel HW Info.vi
Returns the hardware information about the PM32 detector controller. Default values are used in the
case that parameters are not available from the current PM32 detector controller.
The returned values are bundled into two clusters:
• Data Info
1. Version
2. (current) Binwidth (ns)
3. #MaxBins (maximum number of bins to return)
1. DataWidth (default: 2 bytes)
2. MaxShots (default: 4096)
3. Endian (default: big endian)
4. VariableTrace (= FALSE if not supported)
5. (current)
6. #Bins (changeable if VariableTryce = TRUE, otherwise #Bins = #MaxBins)
7. MaxBinwidth (ns) (= Binwidth (ns) if VariableTrace = FALSE, otherwise Binwidth (ns)
is changeable)
• PushInfo
1. PushSupport TRUE: the controller is capable to transfer acquired data via the TCP/IP
data socket (push socket) (= FALSE if not supported)
2. PushDataSize (use if PushSupport = TRUE)
3. CompressionLevel (use if PushSupport = TRUE)
4. VariableCompression (use if PushSupport = TRUE)
101