Download User Manual - Excalibur Engineering

Screen Reference
CONFIGURATION
File Management
When the File Management softkey is pressed with a proper SRAM memory card
inserted in the MEMORY CARD slot, the following screen is displayed. All setup
file names in the card are listed in the table.
You can save all of the test setup information into an SRAM memory card. Data
and time are automatically added from the Test Set. Refer to "Saving a Test Setup
File" on page 161.
Figure 3-64
File Management Screen
Softkey Menu 1
o Save: Stores a new test setup file into a SRAM memory card. Refer to
"Saving a Test Setup File" on page 161.
o Recall: Loads one of the test setup files from a SRAM memory card into the
Test Set. If a proper SRAM memory card is not inserted, this softkey is not
activated. Refer to "Recalling a Test Setup File" on page 163
o Delete: Deletes the file selected by the cursor. If a proper SRAM memory
card is not inserted, this softkey is not activated.
o More (1 of 2): Displays softkey menu 2.
o Return: Displays the previous screen and then the initial screen with
function modes.
Softkey Menu 2
o Print: Allows you to print a hardcopy of a graphic image from the screen.
o Print All: Prints all of the file list on the SRAM memory card.
o Format: Initializes a new SRAM memory card or a used card erasing all
information in it.
NOTE
160
The memory cards which contain the firmware update revisions for the Test Set
can not be initialized using this Format softkey. A PC may be used to initialize
such SRAM cards.
Chapter 3