Download User`s Manual

3.12 Viewing the Calibration History
Every time a CTD-Diver is calibrated, the calibration settings are saved to the Diver’s
internal memory.
To view the calibration history of a CTD-Diver you must first read the settings of the
Diver (see “Reading Diver Settings and Data” on page 34).
Once the settings have been read, click on the
Calibration History button from
the Diver dialog toolbar. The calibration history will be plotted on a graph, as shown
below.
This feature is useful for monitoring changes in calibration over time which may aid in
explaining significant variations in anomalies. Note: In order to view a CTD-Divers
calibration history, the Diver must be connected to the reading unit/interface cable.
Zooming
Using the mouse, left-click and drag the cursor downwards to zoom into a point of
interest on the graph. Release the left-button of the mouse to zoom into the defined
area. To zoom back out, click the [Refresh] button.
3.13 Importing Diver Data
There are several ways in which you can import Diver data into your Diver-VisiONE
project. You can import *.MON or *.DAT files, transfer data from field devices such as
Diver-Pocket and Diver-Mate, and migrate data from LoggerDataManager 5.x
databases.
Viewing the Calibration History
43