Download User`s Guide - Tel-Lynx
Transcript
Preliminary Enter or Edit Names and Phone Numbers in the Tel-Lynx Phone Book Using Your Telephone Keypad Before you set up Tel-Lynx, we strongly suggest you remove any contacts you have entered in your cordless telephone’s phone book. You will want to use Tel- Lynx’s phone book instead so that you can Dial-By-Name and not have to remember phone numbers. Using both your telephone's phone book and Tel- Lynx 's phone book will be very confusing. Entering names and phones numbers into Tel-Lynx’s phone book is different from entering names and phone numbers in your telephone's phone book because Tel- Lynx has no display and no direct access to your telephone's display. The main difference is that you will not be able to see the letters on your telephone's display as you enter them. To compensate for this, Tel-Lynx will say the letters as you enter them. At any point in the entry process, you can display (on your telephone's caller ID display) what you have entered so far by pressing #. You will need a telephone with Caller ID with Call Waiting11 to use this feature. Enter or Edit a Name in the Tel-Lynx Phone Book Here’s how to enter contacts using your telephone's keypad: Use the letters on the telephone keypad. For each letter in the name, repeatedly press a key for the number of times that correspond to the position of the letter on the key. For example, press 2 once for A, twice quickly for B, three times quickly for C, and four times quickly for 2. Press 7 once for P, twice quickly for Q, three times quickly for R, four times quickly for S, or five times quickly for 7. After you pause, Tel- Lynx will translate the key press(es) into the letter, and when you hear the name of the letter you just entered, you can continue. Note: The cursor always sits at the end of the name, so you will always delete from and add to the end of the name. Tel-Lynx will capitalize letters appropriately as you enter them. To change the default case, press the key until you reach the letter the second time. For example, press 2 seven times (abc2ABC) for the upper case C in McCann. Press the ! key once for ampersand (&), twice quickly for apostrophe (’), three times quickly for at (@), four times quickly for dash (-) and five times quickly for one (1). Press the " key once for space or two times quickly for zero. To erase one character from the end of the name, press * briefly. 11 Caller ID with Call Waiting allows you to see a caller's name and phone number for calls that come in while you are on the telephone. Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide Page 21 of 84