Download User`s Guide - Tel-Lynx

Preliminary
 Pairing a Mobile Phone
To pair (or unpair) a mobile phone, use the outside line setup menu to set up
outside line 3 or outside line 4. If outside line 3 or 4 is not currently paired with a
mobile phone, you can take the telephone off-hook and press # 3 to start
pairing on outside line 3 or press # 4 to start pairing on outside line 4.
Make sure you follow TLC 's spoken instructions. The TLC system will be
discoverable for two minutes. You can then hang up the telephone and use your
mobile phone to scan (search, add new device, etc.) for Bluetooth ® devices (in this
case TLC). See the mobile phone's instruction manual to learn how to scan or
search for Bluetooth® devices. The mobile phone will find the TLC system and you
will be led through a pairing process. If asked to enter a password, the password is
"4321".
Note: If you have previously paired a mobile phone with the TLC system and
then unpaired it, make sure you have removed the pairing from the mobile phone
before attempting to pair it again. If you don't, the re-pairing may not succeed.
 Mobile Phone Usage
When a mobile phone is connected to TLC, calls can be placed and received using
the mobile phone handset directly or by using an inside line (telephone, PC,
laptop, or tablet) on the TLC system.
The audio for calls placed or received directly on the mobile handset will remain on
the handset. You may experience a short, momentary loss of audio when you have
been out of Bluetooth® range of the TLC system and then come back into range
and the mobile phone re-connects to TLC.
The audio for calls placed or answered directly using a mobile handset can be
transferred to an inside line (telephone or PC) on the TLC system (see Picking up
a Call in Progress).
Conversely, while an inside line is connected to a call through a mobile phone, you
can transfer the call's audio to the mobile phone. Please see your mobile phone's
user manual for instructions on re-routing the audio back to your mobile phone
away from a Bluetooth® device (in this case, the TLC system).
A call can be transferred back and forth between the TLC system and the mobile
handset any number of times.
To temporarily disconnect a mobile phone from TLC for 10 minutes, at the dial
tone, press #, then press and hold for one second either 3 for mobile
phone 1 or 4 for mobile phone 2. After the 10 minutes is up, TLC will return to
attempting to connect to the mobile phone. This can allow your car's Bluetooth to
connect with your mobile phone when you leave the house. Some car systems
only try once to connect to a mobile phone, and if your mobile phone is still
connected to TLC, they will fail to connect and give up trying.
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Page 51 of 84