Download Hardware Development Guide for i.MX 6SoloLite

Design Checklist
Table 1-10. Miscellaneous recommendations
Checkbox
Recommendation
Explanation/supplemental recommendation
1. The TEST_MODE input is internally connected to an This input is reserved for Freescale manufacturing use.
on-chip pulldown device. The user can either float this
signal or tie it to GND.
2. For termination of unused analog interfaces, see
Table 1-15.
—
3. GPANAIO must be a no connect.
This output is reserved for Freescale manufacturing use.
4. NC contacts are no connect and should be floated.
Depending on the feature set, some versions of the IC
may have NC contacts connected inside the BGA.
Hardware Development Guide for i.MX 6SoloLite Applications Processor, Rev. 1
Freescale Semiconductor
1-9