Download 4COM Manual

Transcript
104
4COM Site Management System
· Tank Distortions (steel tank shape change)
4.2.5
Common Tank Calibration Problems
Not necessarily a problem but possibly due to the ATG Console capacity and/or diameter
properties being different to that of the PCC.
Again not necessarily a problem but a result based on very few data points. This could be because
of very large individual sale volumes OR overlapping sales from multiple dispensers connected to
the same tank where there is very little time where dispensers are idle (which is when these points
are measured)
© 1987 - 2009 Postec Data Systems Ltd, all rights reserved.