Download 4COM Manual

Working with 4COM
45
CardPlans:
The CardPlans page provides the linkage between the cards defined to the site. The linkage is
done by nominating which of the CardPlans, defined in 4COM, the site will accept. In this manner
depending on the authorisation type chosen (positive or negative) for the individual CardPlans,
4COM is able to determine the appropriate list of cards to send to the site when requested. Of
course this option only applies where External Card source option in the
4COM Control Panerl extension is NOT enabled. When enabled any CardPlans assigned to the
site, validation rules defined here (i.e. positive/negative ignore expiry date etc) are ignored/
Note in positive authorised system only authorised cards of the nominated CardPlan(s) are sent to
the site. In negative authorised system only the unauthorized cards are sent to the site. Using this
strategy any card of the correct CardPlan will work unless it is found in the card list.
Lastly the expiry date on the cards is able to be either validated or ignored. Like the authorisation it
applies to the entire CardPlan it is applied to. To select this option right-click the appropriate
allocated CardPlan record and select the expiry date checking option required from the pop-up
menu provided. Because the PEPs can also base its dispenser authorisation from cards lists
provide by 4COM, when the PEPs option is enabled in the previous Tab( PEPs), other validation
functions are provided. A detailed description of the various PCC/PEPs configurations and their
application within 4COM is described in the section Card Management
© 1987 - 2009 Postec Data Systems Ltd, all rights reserved.