Download Add a Camera - D-Link

Section 4 - Configuration
Audio and Video
Two different settings for two video streams (stream 1 and stream 2) can be configured here. You may configure one
setting for computer display and the other one for mobile display.
Mode: Select either JPEG or MPEG4. In JPEG mode, the
video frames are independent. However, MPEG4
consumes much less network bandwidth than
JPEG.
Frame Size: Frame Size: Three options exist for the sizes of the
video display. You can select between 176x144,
352x240, or 640x480. It is recommended using
176x144 for mobile viewing and 640x480 for
computer viewing.
Maximum frame 1 is the minimum value while 30 is the maximum
rate: value. It is recommended choosing 30 for computer
viewing and 5 for mobile viewing.
Video quality: This limits the maximal refresh frame rate, which can
be combined with the “Fixed quality” to optimize the
bandwidth utilization and video quality. If the User
wants to fix the bandwidth utilization regardless of the
video quality, choose “Constant bit rate” and select
the desired bandwidth.
Mute: Select this to mute audio.
Internal Select and set an internal microphone input gain from the drop-down list.
microphone It is necessary to find the optimum gain that transmits the best audio for listening.
input gain:
Note: “dB” stands for decibels, a logarithmic unit of measurement in acoustics. The higher the decibel number, the louder
the sound.
D-Link DCS-3415 User Manual
47