Download SolarPak Manual

Transcript
SolarPak User’s Guide
Here is a side view of how the pole-mounting bracket is attached to a pole:
Align the bracket’s two
parts with the pole.
Tighten the two screws
until the unit is snug
After the SolarPak is at its
correct height and its
north/south alignment is set,
fully tighten the screws with
the hex wrench.
The SolarPak’s angle
relative to the sun can
now be set.
Initially tighten the screws so that the parts are snug but moveable. This will make it easier to adjust
the SolarPak’s north/south alignment and the solar panel’s angle.
9