1
Download SolarPak Manual
Transcript
SolarPak User’s Guide 5 Mounting The Completed Assembly The completed SolarPak assembly may be placed on top of any stable platform, wall-mounted, or pole-mounted. All parts required for wall-mounting or pole-mounting are included. 5.1 Wall mounting 1. 2. 3. 4. Find the best location on a strong wall that can support the weight of the SolarPak. Mark and drill holes in the wall to accommodate screws to hold the mounting plate. If necessary, install anchors (if the SolarPak is to be fastened to a masonry or brick wall). Fasten the wall/pole mounting plate to the wall with four screws through the round holes at the left and right edges of the mounting plate (see below). Insert four M10 screws through the outer four holes to fasten the wall/pole mounting plate. Drilling chart for the wall/pole mounting plate. 7
