Download Archive Appliance Administration Guide

Transcript
Additional Library
AA238 to AA638 models only:
The SCSI Card must be installed by a Alliance Support Engineer
in order to connect an additional Library.
SCSI Port
3.
Connect the power cord to the additional library.
4.
Power on the attached library.
Note: It is important to ensure that the attached library is fully
powered up before powering up the host Appliance. This ensures
that the host recognises the attached library as a connected
device during the initial bus scan.
5.
Power on the Appliance.
By default the attached library keypad interface displays the IP
address and name of the host appliance.
178
Plasmon UDO Archive Appliance