Download Agilent Feature Extraction 12.0 Reference Guide

Command Line Feature Extraction
Error codes from XML file
6
MessageID="29" />
All result messages in the
extraction result entity are slide
level messages. These are the
same messages that show up in
the batch Run Summary. Each
message has a message ID
associated with it. If the message
is Error or Warning then message
ID indicates the type of failure or in
which module the failure occurred.
The errors and warnings are
summarized in the tables at the
end of this chapter.
<ResultMessages
Status="Success"
Message="Protocol in use:
CGH_107_Sep09"
MessageID="30" />
</ExtractionResults>
</Extraction>
</FEProjectResults>
</FeatureExtractionML>
Error codes from XML file
The bold error codes do not
correspond to unique error
messages but instead tell you in
which module the software had an
error.
Feature Extraction Reference Guide
Table 41
XML error codes
Error
code
Error message
Type
Abort?
2002
*** Unable to load tiff image content. ***
Memory
Yes
2000
Insufficient memory
Memory
Yes
3000
Grid is placed outside the scan!
Gridding
Failure
Yes
3000
Found Feature num outside the Scan at
xpos ypos – Ignoring
Gridding
Failure
No
3000
Gridding Error: X location obtained for
grid origin is invalid (GridPlacement)
Grid
Metrics
Yes
3000
Gridding Error: Y location obtained for
grid origin is invalid (GridPlacement)
Grid
Metrics
Yes
3000
The grid may be placed incorrectly. The
spot centroids are shifted relative to their
nominal grid
Grid
Metrics
No
315