Download PlanIT 3.1 User Manual

4.5 Divide The Farm Into Pages
Typically the farm map will be too big to allow all the fields to be viewed
clearly on the one screen, or to allow the field names to be read. To
assist with finding and viewing field information, the farm map can be
broken up into pages. The farm can have several pages with a different
group of paddocks on each page, and/or a different paddock on each
page, and/or a whole farm on each page. Too many pages however will
be just as hard to use as too few, so its recommended that the whole
farm be on one page, and then break the farm up into groups of fields so
that the name of each field can be read on the screen.
1. Use
View > Pan > All
to position the map on
the screen so that the
whole farm can be seen.
2. Click on
View > Pages > Setup
to open the Page
Setup window
3. Click on New
4. "No Pages" will change
to “Page 1 of 1”,
meaning that page 1 is
the whole farm.
5. Click OK.
PlanIT 3.1 User Manual
P/n 1-1248
Page 57
Rev A